SGM700 Digitizer
Configuration Menu -CAL- -continue-
The indicator now shows CP2 to calibrate the
gain point (CP2)
.
And will automatically jump to:
Use key 1 and key 2 to enter the reference value. Key 1 is used for changing the
number (1-9), key 2 is used for changing the position of the cursor. Load the
weigher with the reference value and press key 3 >2 sec.
Up
Down Left Right
Confirm
Done succesfully the following screen is visible:
In
CAL 2
you can check the
weiger
information.
You can check out the, actual
weigher value, actual weigher value x10 and the actual ADC value.
Press key 2 <2 sec. to check out the weigher information.
The following screen is visible:
59