Arctica 4804iqSeries switch Installation Guide Chapter 3 Device Installation
Caution!
Please verify the sign above the port to ensure using the other ports. Connecting to
wrong ports might damage the transceiver or the other ports. When connecting other
devices through a fiber cable to the switch, the output power of the fiber cable must not
exceed the maximum received power of the corresponding modules. Otherwise, it will
damage the fiber transceiver. Do not stare at the fiber bore when the switch is in
operation. That may hurt your eyes.
Figure 3
-
7 Connect the DAC cable to Arctica 4804iq series switch
The connection approach of DAC cable is below:
1. Connect the two side of DAC cable to SFP+ transceiver of Arctica 4804iq
switch.
2. Check out the indicator light state of the light port. If LINK light is bright, it means
the link is connection. If LINK light puts out, it means the lines have trouble and
please check out the line connection.
3.2.7.AC Power Supply Connection
