Arctica 4804iqSeries switch Installation Guide Chapter 3 Device Installation
Figure 3
-
1 Arctica 4804iq series switch install sketch map on the rack using stock
Please mount Arctica 4804iq series on the 19’’ rack as below:
1. Attach the 2 brackets on the Arctica 4804iq series with screws provided in the
accessory kit.
2. Put the machine on the stock of the rack when installing because the machine is
quite heavy.
3. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the Arctica
4804iq series to the rack with the screws provided. Leave enough space around the
switch for good air circulation.
Caution!
Do not place anything on top of the switch. Do not block the blowholes on the switch
to ensure the proper operation of the switch.
3.2.2.Installing the Power Supply Module
Arctica 4804iq switch supports 2 power supplies (Has One power supply in standard
configuration).
