Arctica 4804iqSeries switch Installation Guide Chapter 3 Device Installation
Arctica 4804iq series switch uses 220/110VAC power supply by default. Please read
the power input specification for the detailed information.
Figure 3
-
8 Connect the power supply cable to the Arctica 4804iq series switch
AC Power supply connection procedure is described as below:
1. Insert one end of the power cable provided in the accessory kit into power source
socket, and the other end to the power socket (with overload and leakage protection).
2. Check the power status indicator in the front panel of the switch. The corresponding
PWR indicator should light.series is self-adjustable for the input voltage. As soon as the
input voltage is in the range printed on the switch surface, the switch can operate
correctly.
3. When the switch is powered on, it executes self-test procedure and startups.
Caution!
The input voltage must be within the required range, otherwise the switch can be
damaged or malfunction. Do not open the switch shell without permission. It can cause
physical injury.
Disconnect all power supply cords before servicing.
3.2.8.Checking the Switch
Whether the used power corresponds to the power of the sign.
Whether the ground cable is connected.
Whether the Console cable connect to power cable correctly.
