Arctica 4804iq Series switch Installation Guide Chapter 1 Introduction
The front panel of Arctica 4804iq is shown below:
Figure 1
-
2 Front Panel of Arctica 4804iq
2. Console
description
Arctica 4804iq series switches provide a RJ-45 serial console port, the user perform
the local and telnet configuration through this port.
The console port supports asynchronous mode, set the data bit as 8, the stop bit as
1, the parity bit as none, the default baud rate as 115200bps.
1.2.2.Back Panel
The back panel of Arctica 4804iq includes 2 alternating current of 220V (it provides
redundancy backups) and 3 fan rabbets.
Fig 1
-
3
Back panel of Arctica 4804iq (standard configuration)
Fig 1
-
4 Back panel of Arctica 4804iq (full in)
1.3.Status LEDs
The indicator light on front panel of Arctica 4804iq has 48 RJ45 port indicator light, 4
SFP+ port indicator light, 2 power supply indicator light and system automatic diagnoses
LED. They are shown below and described in the following table.
Table 1
-
2 The explanation of indicator light of Arctica 4804iq series switch
