PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
Page 20 of 67
Field wiring connections are made at the Terminal Strip located within the
Terminal Panel Enclosure. Figure 2.6 below details the numbered terminal
strip and connection detail. All connections are to be made to the lower,
numbered terminal connections.
Terminal #
Connection
1
L1 - 120V AC Input Pow er
2
N - 120V AC Input Pow er
3
Ground - Input Pow er
4
L1 - Auger Motor Output
5
N - Auger Motor Output
6
Ground - Auger Motor
7
L1 - Air Cleanout Solenoid
8
N - Air Cleanout Solenoid
9
Ground - Air Cleanout Solenoid
10
N.O. Contact - Alarm Output
11
N.O. Contact - Alarm Output
12
T1 - Tstat Dry Contact Input
( N O V o l t ag e)
13
T2 - Tstat Dry Contact Input
( N O V o l t ag e)
14
24V DC - Stack O2 Sensor (OPTION)
15
24V DC - Stack O2 Sensor (OPTION)
16
Stack Temperature Sensor (RED)
17
Stack Temperature Sensor (BLK)
Pellergy
PB
‐
1525
Connection
Detail
Figure 2.6: Terminal Connections for the PB-1525 Wood Pellet Burner
System.
A schematic detail of the Terminal Panel Enclosure is shown below in
Figure 2.7. All wiring connections shown in this detail are factory
performed. The detail is provided for informational and troubleshooting
purposes only.
