pellenc HELION POLE TELESCOPIC, Руководство пользователя

Страница: 17 / 22

17
54_08_039A
4 Nm
max.
G
SERVICING
REPLACING THE TRIMMER BLADE
WARNING:
Before working on the tool, check that the ON/OFF switch is set to the OFF position «0» and
disconnect the power supply lead from the battery.
Disconnect the power supply lead after moving the switch
to the off position.
Unscrew the 3 screws using a Torx 25 screwdriver.
Fit the desired trimmer blade.
Torque tighten the 3 retaining screws to 4 Nm.
WARNING:
Never use a trimmer blade other than the one specifi ed by PELLENC. Failure to do so will
result in a risk of personal injury.