pellenc HELION POLE TELESCOPIC, Руководство пользователя

Страница: 15 / 22

15
20gr
54_08_017B
54_08_020A
56_10_016A
56_10_016A
56_10_016A
SERVICING
GREASING THE TRIMMER BLADE REDUCTION GEAR (LEVEL 1)
TIGHTENING THE BLADES (LEVEL 1)
SHARPENING THE BLADES (LEVEL 2)
The trimmer blade reduction gear must be greased
after 25 hours of use and every 50 hours.
WARNING! Always disconnect the hedge trimmer
from the battery before working on the blades.
WARNING! Always disconnect the hedge trimmer
from the battery before working on the blades.
Sharpen the blades little but often.
Check the sharpness of the blades regularly during the
first hours of work in order to determine the necessary
sharpening frequency.
Ensure an angle of 45° on the blade during sharpening.
Unscrew the screw located under the trimmer blade
reduction gear using a Torx 25 screwdriver.
Apply 20 grams of Pellenc grease (P/N 115174).
PELLENC recommends using the grease pump ref.
68518.
Check the tightness of the blades on a regular basis.
Tighten the screws to 3 Nm.
The clearance obtained between the blades must be
between 0.2 and 0.4 millimeters.