pellenc EXCELION 2 DH, Руководство пользователя

Страница: 29 / 88

BRUSH CUTTER EXCELION 2 DH
53_153238-A
3. Screw the head counterclockwise until in contact
with the angle gear.
4. Insert the Torx 25 key (22) into the hole on the angle
gear.
5. If necessary, turn the head slightly so that the Torx
25 wrench (22) also fits into the corresponding hole
on the cutting head this time.
This action will allow the position of the motor shaft
and the support washer to be locked.
6. Tighten the head counterclockwise to lock the posi-
tion.
Fitting a strimmer wire
The TAP CUT wire refill system that allows it to be refilled
with strimmer wire without having to open the head.
1. For the TAP CUT 2, turn the central part so as to
align the arrows on the outer part with the lines on
the central part.
2. For the TAP CUT 3, turn the central part so as to
align the arrows on the outer part with the lines on
the central part.
29