pellenc EXCELION 2 DH, Руководство пользователя

Страница: 66 / 88

BRUSH CUTTER EXCELION 2 DH
53_153238-A
6.5. ANGLE GEAR LUBRICATION
1. Remove the screw located on the angle gear (11)
using the Torx 25 key (22) supplied with your tool.
2. Apply 4 grams of PELLENC grease (reference
35749), once a month or every 100 hours.
3. Grease the thread of the angle gear shaft (11) to fa-
cilitate the loosening of the cutting head nuts.
4. Fit the screw located on the angle gear (11) using
the Torx 25 key (22) supplied with your tool.
6.6. SAWING KIT MAINTENANCE
6.6.1. ANGLE GEAR LUBRICATION
1. Remove the screw located on the angle gear (11)
using the Torx 25 key (22) supplied with your tool.
2. Apply 4 grams of PELLENC grease (reference
35749), once a month or every 100 hours.
3. Grease the thread of the angle gear shaft (11) to fa-
cilitate the loosening of the cutting head nuts.
4. Fit the screw located on the angle gear (11) using
the Torx 25 key (22) supplied with your tool.
6.6.2. DISMOUNTING/FITTING OF THE CITY CUT SAFETY GUARD
Dismounting
1. Using a T20 screwdriver, unscrew the 4 screws hol-
ding the safety guard in place.
2. Remove the casing.
Fitting
1. Position the safety guard behind the angle gear.
2. Using a T20 screwdriver, tighten the 4 screws hol-
ding the safety guard in place.
66