pellenc EXCELION 2 DH, Руководство пользователя

Страница: 19 / 88

BRUSH CUTTER EXCELION 2 DH
53_153238-A
5. When it is completely unscrewed, remove the
handle adjustment knob (2).
6. Insert the electrical wire of the handle module inside
the tool support.
7. Position the handle at an angle of 45°.
Important
Do not force the handle when fitting it onto the brush
cutter. Risk of breakage. The handle can be inser-
ted without exerting force if the 45° angle is respec-
ted and if the marks are correctly aligned.
8. Insert the handle module in the slot provided for this
purpose, making sure to align the keys.
Note
When fitting the handle module on the tool, be
careful not to pinch the tool's electrical wire.
9. Insert the handle adjustment knob (2) into the handle
module.
10. Screw until the "click". This means that the thread
corresponding to mark B is screwed in.
11. Screw in the second thread (mark A) by pushing
downward on the adjustment knob (2).
This step will allow the adjustment knob and the
handle to be locked.
19