pellenc EXCELION 2 DH, Руководство пользователя

Страница: 39 / 88

BRUSH CUTTER EXCELION 2 DH
53_153238-A
4.5. CONNECTING PELLENC BATTERIES TO THE TOOL
Important
Always check the remaining battery-life before use. If necessary, recharge the battery using the charger.
To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving
them in contact with abrasive or dirty surfaces, or subjecting them to significant impacts (falls).
For more information on PELLENC batteries see the battery instructions.
1. Install the battery and the power cord on the har-
ness, refer to the assembly sheet supplied with the
harness.
2. Check that the power cord is properly connected.
3. On the right chest strap of the harness, connect
the adapter cord (reference 57238 for 750 battery,
57248 for Alpha 520 battery) to the quick connector
of the power cord (19) of the Brush cutter .
4.6. DISCONNECTING THE BATTERY
1. Switch off the tool (refer to Section 5.1.2, « Stopping
the tool »).
2. On the right chest strap of the harness, disconnect
the adapter cord from the quick connector of the po-
wer cord (19) of the Brush cutter .
3. To remove the battery from the harness, refer to the
battery instructions and to the harness assembly ins-
tructions
4.7. ADJUSTING THE WORKING POSITION
Important
Take the time to properly adjust your harness and machine. This will guarantee your ease of use and prevent
any discomfort.
Before use, the working position of Brush cutter Excelion 2 DH must be adjusted according to the size of the user.
Adjusting the machine's working position to the operator's size is a 3-step process:
39