VISION SC600
Pag. 23
Rev. 02-18
USE AND MAINTENANCE MANUAL
I2
Setting of digital input n.2
as I1
2
I3
Setting of digital input n.3
as I1
3
I4
Setting of digital input n.4
as I1
4
I5
Setting of digital input n.5
as I1
5
I6
Setting of digital input n.6
as I1
11
I7
Setting of digital input n.7
as I1
12
I8
Setting of digital input n.8
as I1
13
I9
Setting of digital input n.9
as I1
14
I10
Setting of digital input n.10
as I1
15
I11
Setting of digital input n.11
as I1
23
I12
Setting of digital input n.12
as I1
24
I13
Setting of digital input n.13
as I1
25
I14
Setting of digital input n.14
as I1
26
I15
Setting of digital input n.15
as I1
27
(*)Resetting the compressor working times by displaying the desired hour counter (Hr1,
Hr2, etc.) and simultaneously pressing the two SET (compressors and fans) keys for at
least 10 seconds. After this time the control emits a beep of confirmation of completed
operation.
ACTIVATION SEQUENCE AND DELAYS
The activation logic of the digital outputs is selected by parameter Seq (for both
compressors and fans).
NB c / u indicates compressors / fans parameter, i.e. t1c / U indicates both parameters T1c and t1U.
With
SEq=1
, the activation of digital outputs always follows the 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
sequence and the 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 disabling one complying with the
t1C/U
,
t2C/U
,
t3C/U
,
t4C/U
times. If an output is not available because an alarm occurs, it will be
temporarily excluded from the sequence.
5.14
CHAP. 5 - Data programming
