Peco BRUSH BLAZER TBB-3002, Руководство оператора

Страница: 7 / 42

7
OPERATION
The PECO Brush Blazer is equipped with an Operator Presence Switch located on the Left Steering Control Handle.
Your left hand must be on the Left Steering Control Handle at all times when operating the machine. Removing your
left hand from the Left Steering Control Handle will engage the kill switch on the engine. This feature is designed and
installed for your safety. Familiarize yourself with the controls and descriptions in the section below.
Starting The Brush Blazer
1. Place
Your Left
Hand On
The Left
Steering
Control
Handle
2. Push
The
Throttle
Control
Forward
3. Turn The Key Switch To The Run Position
And Wait For The Fuel Pump To Engage.
Once The Fuel Pump Is Engaged, Turn The
Key To The Start Position And Release
WARNING
!
READ THE SAFETY AND OPERATION PROCEDURES BEFORE USING THE PECO
BRUSH BLAZER. DO NOT LET ANYONE OPERATE THE PECO BRUSH BLAZER IF
THEY HAVE NOT READ AND ARE FAMILIAR WITH THE SAFETY AND OPERATION
PROCEDURES. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.