Peco BRUSH BLAZER TBB-3002, Руководство оператора

Страница: 2 / 42

2
PECO BRUSH BLAZER
TABLE OF CONTENTS
SECTION PAGE
Safety Alert Symbols - - - - - - - - - - - - - - - - - - - - - 2
General Safety Rules - - - - - - - - - - - - - - - - - - - - - 3
Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Peco Limited Warranty - - - - - - - - - - - - - - - - - - - - 5
Controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-10
Tips On Brush Cutting - - - - - - - - - - - - - - - - - - - - 10
Pump Adjustment - - - - - - - - - - - - - - - - - - - - - - - 11
Pump Belt Adjustment - - - - - - - - - - - - - - - - - - - - 12
Drive Belt Idler Adjustment - - - - - - - - - - - - - - - - - 13
Drive Belt Adjustment - - - - - - - - - - - - - - - - - - - - - 14
Deck Belt Adjustment - - - - - - - - - - - - - - - - - - - - - 15
Mower Deck Pulley Alignment - - - - - - - - - - - - - - - 15
SECTION PAGE
Deck And Drive Belt Removal And Replacement - 16-17
Track Removal/Replacement - - - - - - - - - - - - - - - - 18
Blade Shaft Assembly - - - - - - - - - - - - - - - - - - - - - 19
Blade Replacement - - - - - - - - - - - - - - - - - - - - - - 19
Label Replacement Part Numbers - - - - - - - - - - - - - 20
Regular Maintenance - - - - - - - - - - - - - - - - - - - - - 21
Scheduled Replacement Parts List - - - - - - - - - - - - 22
Hydraulic Oil Specifications - - - - - - - - - - - - - - - - - 22
Exploded Views And Parts Lists - - - - - - - - - - - - 23-38
Torque Specifications - - - - - - - - - - - - - - - - - - - - - 39
California Emission Control Warranty Statement - 40-41
Safety Alert Symbol
This Safety Alert Symbol means: “ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!”
This symbol is used to call attention to safety precautions that
Should be followed by the operator to avoid accidents. When
you see this symbol, carefully read the message that follows
and heed its advice. Failure to comply with safety precautions
could result in death or serious bodily injury.
Safety Signs
The signal words DANGER, WARNING, and CAUTION are used on the equipment safety signs. These words
are intended to alert the viewer to the existence and the degree of hazard seriousness.
DANGER
!
CAUTION
This signal word indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.
This signal word indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
It may also be used to alert against unsafe practices.
This signal word indicates a potentially hazardous situation which, if not
avoided, will result in minor or moderate injury.
It may also be used to alert against unsafe practices.
White letters on RED
Black letters on ORANGE
Black letters on YELLOW
WARNING
!
!
!