Peak Scientific TOC 1000, Руководство пользователя

Страница: 16 / 26

Page 16
WARNING
Electrical Connection
Connect the generator to an appropriate 120 or 230 volt single-phase supply, refer to
the generator serial plate for input specification and ensure your supply matches the
requirements.
If the appropriate power cord is not supplied, a new plug with correct rating can be
fitted by a qualified electrician, ensuring that it has adequate ratings and appropriate
approvals for the country of operation. Failure to do so could cause damage to the
generator or risk of overloading of the power cord.
If a substitute main supply cord is used, ensure that it has adequate
ratings and appropriate approvals for the country of operation. Failure
to do so could cause damage to the generator or risk of overloading of
the power cord.
This unit is classified as SAFETY CLASS 1. THIS UNIT MUST BE EARTHED. Before
connecting the unit to the mains supply, please check the information on the serial plate.
The mains supply must be of the stated AC voltage and frequency.
EARTH/GROUND (E):- Green & Yellow or Green
LIVE (L):- Brown or Black
Neutral (N):- Blue or White
Electrical requirements are 120VAC nominal +/- 5% or 230VAC n/- 10%
depending on chosen model. Extended periods at extremes can have a detrimental
effect on the operation and life of the generator.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment maybe impaired.
WARNING