background image

Page 32

Go Online or Complete and Return

You can register for your 

FREE 12 month Warranty 

with ease online at 

www.peakscientific/protected

.

Alternatively, you can send the completed form to Peak Scientific by post or 
email at 

[email protected]

.

Product Warranty Registration

Contact name

Email address

Company

Address

City/town

Postcode

Country

Telephone

Generator serial #

Model type

Installation date

Do you still use an 

alternative gas solution i.e. 

cylinders or bulk liquid?

Yes                 No

What gas requirements do 

you have in your lab?

Hydrogen             Nitrogen            Zero Air

Extend your cover with

Peak Scientific offer comprehensive gas generator after sales support 

packages.  Peak [Protected] aftercare support can guarantee an on-site 

response within 72 hours*, genuine parts from our ISO9001 approved factory 

and a 95% first-time fix rate.  See our enclosed Peak [Protected] leaflet for 

further information.

Important!

You have 1 month to register your Peak Scientific product from the date of installation. Once 

registered the warranty will be honoured for a period of 12 months. If you wish to defer the installation 

of your generator, you must notify Peak Scientific immediately by emailing warranty@peakscientific.

com. For generators that remain unregistered after 1 month from the shipment date, the warranty will 

be considered active from the date of factory dispatch.

* Complete Plan only

Go Online or Complete and Return

We know that registering any of your recently purchased products is not 

the first thing on your mind- but it is very important to both of us. Not all 

warranties are alike and Peak Scientific stand out against other gas suppliers as 

we offer a comprehensive, quick response, on-site warranty.  This means that 

in the very unlikely case that your gas generator develops a fault we have rapid 

support teams on-hand around the world who are able to come to your lab and 

get you back up and running in no time.

Register for your 

comprehensive 12 month on-site warranty 

with ease online at 

www.peakscientific.com/protected.

Alternatively, you can send the completed form to Peak Scientific by post or 
email at [email protected].

Important!

You have 

1 month to register

 your Peak Scientific product from the date of 

installation. Once registered the warranty will be honoured for a period of 12 

months. If you wish to defer the installation of your generator, you must notify 

Peak Scientific immediately by emailing 

[email protected]

. For 

generators that remain unregistered after 1 month from the shipment date, the 

warranty will be considered active from the date of factory dispatch.

Содержание Infinity XE 60 Series


































Отзывы: