PE micro Cyclone for STMicro Скачать руководство пользователя | Manualshive

Страница: 2 / 86

background image

Purchase Agreement

P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to
any products herein to improve reliability, function, or design. P&E Microcomputer Systems, Inc.
does not assume any liability arising out of the application or use of any product or circuit
described herein.
This software and accompanying documentation are protected by United States Copyright law
and also by International Treaty provisions. Any use of this software in violation of copyright law
or the terms of this agreement will be prosecuted.
All the software described in this document is copyrighted by P&E Microcomputer Systems, Inc.
Copyright notices have been included in the software.
P&E Microcomputer Systems authorizes you to make archival copies of the software and
documentation for the sole purpose of back-up and protecting your investment from loss. Under
no circumstances may you copy this software or documentation for the purpose of distribution to
others. Under no conditions may you remove the copyright notices from this software or
documentation.
This software may be used by one person on as many computers as that person uses, provided
that the software is never used on two computers at the same time. P&E expects that group
programming projects making use of this software will purchase a copy of the software and
documentation for each user in the group. Contact P&E for volume discounts and site licensing
agreements.
P&E Microcomputer Systems does not assume any liability for the use of this software beyond
the original purchase price of the software. In no event will P&E Microcomputer Systems be
liable for additional damages, including any lost profits, lost savings or other incidental or
consequential damages arising out of the use or inability to use these programs, even if P&E
Microcomputer Systems has been advised of the possibility of such damage.
By using this software, you accept the terms of this agreement.

MS-DOS & Windows are registered trademarks of Microsoft Corporation. IBM is a registered
trademark of IBM corporation.

P&E Microcomputer Systems, Inc.
98 Galen St,
Watertown, MA 02472
http://www.pemicro.com

May 2015
Manual version 1.06

«
1
2
3
4
...
»

Содержание Cyclone for STMicro























































































Отзывы:

Нет отзывов

Похожие инструкции для Cyclone for STMicro

Бренд: Meccanica Fadini Страницы: 4

KEEX-1850 Series

Бренд: Quanmax Страницы: 61

Бренд: ZiLOG Страницы: 41

WAFER-CV-N26001

Бренд: IEI Technology Страницы: 135

PX845EV1 Series

Бренд: Albatron Страницы: 56

Бренд: Intel Страницы: 110

Бренд: Texas Instruments Страницы: 19

Бренд: Gigabyte Страницы: 96

Бренд: Gigabyte Страницы: 44

Бренд: Texas Instruments Страницы: 21

Бренд: Fujitsu Страницы: 64

Бренд: MotorGuide Страницы: 31

Бренд: Texas Instruments Страницы: 36

Бренд: Gigabyte Страницы: 2

Бренд: Mercury Страницы: 108

Бренд: ASROCK Страницы: 52

ISL8200MEVAL1PHZ

Бренд: Intersil Страницы: 9

Бренд: Totem Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды