PE micro Cyclone for STMicro, Руководство пользователя

Страница: 76 / 86

Cyclone for STMicro - User Manual 71
CYCLONE FOR STMICRO
PRINTABLE
These buttons are used to set the properties of selected (colored yellow)
bytes of the Serial Number. Individual bytes whose properties you wish to
modify are selected or deselected by double-clicking in the Hex Upper
Bounds box in the column that corresponds with the values for a particular
byte.
11.3 Serialize Utility Example
This example shows:
1. Currently editing file C:\Example.ser
2. Number of bytes in the serial number is 10 Hex (= 16 base ten)
3. Starting address is 0000000 Hex
4. Next Serial number is AAA-P&E-9999 in ASCII
a. First 3 bytes are Upper Case Alphabetic ASCII (AAA)
b. Next 5 bytes are Constants (-P&E-)
c. Last 4 bytes are Numeric ASCII (9999)
5. This provides for a maximum of 6,760,000 (26x26x26x10x10x10x10)
serial numbers from AAA-P&E-0000 to ZZZ-P&E-9999.
6. The last 4 bytes of the serial number are selected (colored yellow) so
that their properties can be changed using the forced selected byte
buttons on the bottom of the screen.
11.4 Using Serial Number File
The command to invoke the serial number file in P&E’s interactive
programming software is “CS Choose Serial File”. The command to actually
program the serial number to target and automatically increment the serial
number afterward is “PS Program Serial Number”.
P&E’s command line software uses the same commands in a command line
fashion to invoke the serial number file, initiate its programming, and
increment:
CS serial_number_file.ser
PS