PE micro Cyclone for STMicro, Руководство пользователя

Страница: 23 / 86

18 Cyclone for STMicro - User Manual
CYCLONE FOR STMICRO
target board may derive power by the use of the power jacks, by the use of
the debug connector, or both. The options are explained in detail below. Each
configuration will have an associated jumper setting that MUST be set on the
Cyclone for STMicro. The jumper header is found on the long front side of the
unit, directly to the left of the Target Power In and Out jacks.
Figure 3-15: Jumper Settings, Viewed From Underside Of Cyclone
3.15.1 Using Power In Jack and Power Out Jack
The target power supply is connected to the Power In Jack of the Cyclone for
STMicro. The Power Out Jack of the Cyclone for STMicro is connected to the
target system.
Figure 3-16 shows the connections.
Figure 3-16: Via Power In and Power Out Jacks of Cyclone for STMicro