PE micro Cyclone for STMicro, Руководство пользователя

Страница: 51 / 86

46 Cyclone for STMicro - User Manual
CYCLONE FOR STMICRO
6 STAND-ALONE PROGRAMMER MANUAL CONTROL
The Cyclone for STMicro must be configured before it may serve as a Stand-
Alone Programmer. The user may manually control the Cyclone for STMicro:
via the buttons/LEDs, LCD menu, or via PC software. The target power
management schemes remain the same for each control method.
6.1 Operation Via Cyclone for STMicro Buttons
There are five (5) buttons on the top of the Cyclone for STMicro which are
used for stand-alone programming and to navigate the LCD menus. They are
specified as follows.
Button Function
START / Start executing the tasks pre-configured into the
Cyclone for STMicro.
Menu Mode: Navigate upwards in LCD menu.
AUX / Perform auxiliary function (stand-alone verification).
Menu Mode: Navigate downwards in LCD menu.
MENU / [SELECT] Toggles ON/OFF the Target Board Power.
Menu Mode: Select highlighted item in LCD menu.
CANCEL Cancel the tasks being executed and go back to the
standby state.
RESET Hardware reset of the Cyclone for STMicro.
6.1.1 Cyclone for STMicro LED Indicators
The Cyclone for STMicro has four (4) LEDs to indicate the current operation
stage.
LED FUNCTION
Power Indicates that the target board power is connected.
Idle The Cyclone for STMicro is waiting for instructions.
Error The Cyclone for STMicro failed to execute the
functions as instructed.
Success The Cyclone for STMicro executed the functions
successfully.