background image

  

 

 
 
 
Better Solutions Are Within Reach

TM

 

MODEL NUMBER:

 

PDI-P26/ P32/ P40 LCD 

Document Number:

 

PD196-145R3 

 

Quick Start Guide 

Page 1 of 9 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH 1-800-628-9870  FX 937-743-5664

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 

WARNINGS 

 

 

This symbol is intended to alert the user of the 
presence of un-insulated ‘dangerous voltage’ within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to 
persons. 

 

This symbol is intended to alert the user of the 
presence of important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance. 
 

NOTE TO CABLE TV INSTALLER 

This reminder is provided to call the cable TV systems installer’s 
attention to Article 820-40 of the National Electrical Code. The 
code provides guidelines for proper grounding and, in particular, 
specifies that the cable ground shall be connected to the 
grounding system of the building, as close to the point of the 
cable entry as practical. 

FCC 

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is 
operated in a residential or commercial installation. If this 
equipment does cause harmful interference to radio or TV 
reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference 
by one of more of the following measures: 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and 

receiver. 

  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected. 

  Consult the dealer or an experienced radio/TV technician 

for help. 

 

  

 

 

SAFETY INSTRUCTIONS 

 
INSTRUCTIONS 

Be sure to read, follow, and keep these instructions. Heed all 
the warnings.

 

OTHER EQUIPMENT 

Use only with the cart, stand, tripod, bracket or 
table specified by the manufacturer or sold with 
the apparatus. Use caution when moving the 
cart / apparatus combination to avoid injury from 
tip-over.

 

 
MAINTENANCE AND SERVICING 

Servicing is required when the apparatus has been 
damaged in any way: the power cord or plug is 

damaged, liquid has been spilled, objects have fallen into the 
apparatus, the apparatus has been exposed to rain or moisture, 
it does not operate normally, or it has been dropped. 

Never remove the back cover of the TV; this can expose you to 
high voltage and other hazards. If the TV does not operate 
properly, unplug it and call an authorized service center or PDI. 

POWER CORD 

Protect the power cord from being walked on or pinched 
particularly at the plugs, convenience receptacles, and the point 
where it exits from the apparatus. 

CAUTION:

 DO NOT defeat the safety purpose of the 

polarized or grounding-type plug.  A polarized 
plug has two blades with one wider than the 

other.  A grounding type plug has two plates and a third 
grounding prong.  The wide blade or the third prong is 
provided for your safety.  If the provided plug does not fit 
into your outlet, consult an electrician for replacement of the 
obsolete outlet. 

 

RAIN AND MOISTURE WARNING

: To avoid the 

hazards of fire or electrical shock, DO NOT expose 
this TV to rain or moisture. 

 

 

 

WET LOCATION 

The apparatus SHOULD NOT be exposed to dripping or 
splashing. Objects filled with liquids, such as vases, SHOULD 
NOT be placed on the apparatus. 

OXYGEN ENVIRONMENT WARNING

: DO NOT 

use in an oxygen tent or an oxygen chamber. Such 
use may cause a fire hazard.

 

CLEANING AND DISINFECTION 

Clean the exterior of this TV by removing dust with a lint-free 
cloth.  

CAUTION:

 To avoid damage to the surface of the TV, DO NOT 

use abrasive or chemical cleaning agents. Clean only with a dry 
cloth. 

DISCONNECTING DEVICE FROM MAINS 

The main plug is the disconnecting device.   

CAUTION:

 Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

PRODUCT MODIFICATION 

DO NOT attempt to modify this product in any way without 
written authorization. Unauthorized modification could void the 
user’s authority to operate this product.   

OVERHEAD FALLING HAZARD 
WARNING

: To prevent injury, this apparatus must be securely 

attached to the wall in accordance with the installation 
instructions.  TVs can pose a striking hazard when mounted at 
an elevated position.

 

 

Содержание PDI-P26LCD











Отзывы: