MODEL:
PDi BELLA-HD Interface
Document Number:
PD196-426R1
User Manual
Page 11 of 27
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.PDiarm.com
and
www.mymedTV.com
▪ Phone 800.628.9870
Central Style PDI-772HE-IND Power Supply - RF Cable Installation
Low voltage AC TV power is present on each central power supply TV RF out port. Each RF In port is designed to be connected to a
separate RF source with minimal loss and high isolation.
1. Remove power from the TV at the central power supply.
2. Connect a coaxial cable from the set-top-box “OUT TO TV” to one of the 10 “RF IN” ports on the PDI-772HE-IND.
3. Connect the coaxial cable from the TV to “RF OUT”. The TV coax should be limited to 150’ to accommodate the central power
supply coax length limitations.
4. Connect an Optional Secondary RF signal coaxial cable to the set-top-box “OFF-AIR IN”. This connection is only necessary if you
wish to view TV signals that are already present on your system in addition to set-top-box signals. Signal strength entering the
set-top-box should be +3dBmV to +10dBmV.
