PDi BELLA-HD PD295-004, Руководство пользователя

Страница: 18 / 27

MODEL:
PDi BELLA-HD Interface
Document Number:
PD196-426R1
User Manual Page 18 of 27
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.PDiarm.com and www.mymedTV.com
▪ Phone 800.628.9870
Provider Set Top Box Model
On Screen “STB
Model” Setting
Cablevision Scientific Atlanta Explorer 4250HD SciAtl/Cisco
Charter/Spectrum Motorola DCH6200 Moto/Arris
Charter/Spectrum Motorola DCT2224 Moto/Arris
Comcast/Xfiniti Pace DC50X Cmcst X1
Comcast/Xfiniti Pace PXD01ANI Cmcst X1
Comcast/Xfiniti Comcast PR150B Cmcst Legacy
Comcast/Xfiniti Comcast RNG110 Cmcst Legacy
COX
COX 3250HD
(Scientific Atlanta Explorer 3250HD)
SciAtl/Cisco
COX COX DTA250HD Cox DTA250HD
Dish Dish ViP211k Dish
Dish Dish ViP222k Dish
Haivision Haivision Stingray Hai Stingray
Haivision Haivision Mantaray Hai Mantaray
Time Warner Cable/Spectrum Cisco DTA 271HD SciAtl/Cisco
Time Warner Cable/Spectrum Cisco 8742 HDC SciAtl/Cisco
Time Warner Cable/Spectrum Spectrum101-T SciAtl/Cisco
Verizon Moto/Arris
Keypad Programming (Mapping) Instructions
The set-top-box (STB) can be controlled remotely by any of the following that incorporate a keypad: Pillow Speaker, TV’s Keypad
(Arm Mounted TV’s), or Handheld Remote Control. In other words, any control device that incorporates a keypad capable of
controlling the TV can also control the set-top-box.
Keypad Programming or Mapping
involves assigning key functions to the
corresponding set-top-box (STB)
functions. It is common practice to
designate a control button to activate the
STB’s Channel “Guide” feature. This
feature allows for quicker selection of
satellite channels. Some common control
buttons used for “Guide” are listed
below. Your installation may vary
depending upon the control device’s
availability of these particular buttons.
Control Button STB Function
Menu Guide
(-) Guide
1. Enter the Interface Module Setup Menu (See “Understanding Interface Module Setup Menus” earlier in this manual).
2. Select menu pages 1 through 5.
3. For each “TV Key” on the left column, set the matching “STB COMMAND” on the right column to the desired STB function.