MODEL:
PDi BELLA-HD Interface
Document Number:
PD196-426R1
User Manual
Page 15 of 27
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.PDiarm.com
and
www.mymedTV.com
▪ Phone 800.628.9870
Interface Module Setup Menus
The interface module is configurable from Setup menus accessed by the TV programming remote or onscreen touchscreen controls.
The following instructions assume you have connected the TV, interface module, STB, and the various components according to the
previous instructions contained in this manual.
Accessing Interface Module Setup Menus on most PDi TVs
1. Make certain the STB and interface module are powered. See the instructions that came with the STB for more details.
NOTE: Some set-top-boxes (STBs) require several minutes following application of initial power to effectively respond
to commands. Please allow enough time for the STB to properly initialize.
2. Stand in front of the TV and press the SETUP button on the PD108-420 programming remote
3. When the TV Setup menu appears on the TV’s screen, press SETUP a second time to display the interface module setup menu.
4. Press the “CH▲” or “CH▼” on the remote to highlight the desired option. To advance to the next page, press “CH▼” when the
bottom item on the list is highlighted.
5. Press “VOL►” or “VOL◄” on the remote to cycle through a menu item’s setting options.
6. When finished, press SETUP to exit the “interface module setup” menu and save changes.
Accessing Interface Module Setup Menus on medTAB-C
1.
Make certain the STB and interface module are powered. See the instructions that came with the STB for more details.
NOTE: Some set-top-boxes (STBs) require several minutes following application of initial power to effectively respond
to commands. Please allow enough time for the STB to properly initialize.
2.
From the TV app, open the TV Settings Menu, by pressing SETUP on the programming remote or by pressing Settings on the
touchscreen TV controls. Enter password (“45066” is the factory default).
3.
Select Advanced Option then press SETUP on the programming remote OR tap anywhere on the screen to open the STB interface
module setup menu.
4.
Press the “CH▲” or “CH▼” on the programming remote OR use the touchscreen navigation arrows ▲ ▼ to highlight the desired
option. To advance to the next page, press “CH▼” or ▼ when the bottom item on the list is highlighted.
5.
Press “VOL►” or “VOL◄” on the programming remote OR use the touchscreen navigation arrows ► ◄to cycle through a menu
item’s setting options.
6.
When finished, press SETUP on the programming remote OR press Settings on the touchscreen controls to exit the “interface
module setup” menu and save changes.
NOTE: FAILURE TO EXIT the interface module setup menu by following this step 6
could result in patient access to interface module setup menus.
