MODEL:
PDi BELLA-HD Interface
Document Number:
PD196-426R1
User Manual
Page 14 of 27
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.PDiarm.com
and
www.mymedTV.com
▪ Phone 800.628.9870
Power
On – Yellow Solid – Indicates that the minimod processor has power and is running properly.
Off – No power supplied to the minimod, either through the USB or power connector.
STB Link
Note: If a DirecTV box is not used or is used but not connected with the USB cable, this LED will not be active. The minimod box can be
powered with a separate wall wart and the IR output used to control the set-top-box.
On – Green – Indicates communication between the minimod and the DirecTV set-top-box. It may take up to 2 minutes after power is
cycled before the light will turn on.
Off – No set-top-box communication. Check USB cable connection. Cycle power to set-top-box.
TV COM
On – Green – Indicates communication to the remote TV. This may blink occasionally indicating TV communication.
Off – No TV communication. If this light is off and the TV LINK light is on solid, there is a CCI cable connection problem inside the TV.
LINK
On – Green – Solid – Indicates an active connection to the remote TV. This indicator is different in functionality than the TV COMM led.
This indicates the CAT6 cable connection is good between the minimod and the TV, but not necessarily communication to the TV
board. See the TV COMM description above.
Off – No CAT6 connection to the TV. If this light is off and the POWER light is on solid, there is a CAT6 cable connection problem
between the minimod and the TV.
HDMI
On – Green – Blinking – Indicates an active HDMI video stream connection to the TV. This indicator is different in functionality than
the TV COMM led. This indicates the CAT6 cable connection is good between the minimod and the TV, but not necessarily
communication to the TV board. See the TV COMM description above.
Off – If this light is off and the TV LINK light is on, check the HDMI input connection. If both TV LINK and TV HDMI lights are off, there
is no CAT6 connection to the TV. If this light is off and the POWER light is on solid, there is a CAT6 cable connection problem between
the minimod and the TV. The HDMI input can be working and this light be off it the HDMI signal is not being received by the TV.
POWER
STB
LINK
TV
COM
LINK
HDMI
SUGGESTIONS
OFF
OFF
OFF
OFF
OFF
1. Verify interface module is powered (USB or Power adapter)
ON
ON
ON
ON
ON
1. All connections are proper – HDMI may be solid green or blinking.
ON
ON
OFF
OFF
OFF
1. No CAT6a connection to TV
2. No power on TV.
ON
ON
OFF
ON
ON
1. CCI connection issue inside TV
2.
ON
ON
ON
ON
OFF
1. No HDMI input from set-top-box.
2. No HDMI connection inside of TV.
3.
4.
ON
OFF
ON
ON
ON
1. Press RESET button on set-top-box. Wait 2 minutes for STB to reboot.
ON
ON
