5. These units are not provided with an outdoor antennae; when provided, it should be installed in accordance with Article
810 of the U.S. National Electrical Code, ANSI/NFPA 70.
6. Do not service this product yourself as opening or removing covers may expose you to dangerous voltage or other risk of
injury. Refer all servicing to qualified service personnel.
7. When the power supply connection or power supply cord(s) are damaged; if water is entering the audio/video compart-
ment or any electrical equipment compartment area; if the protective shields or barriers are showing signs of deterioration;
or if there are signs of other potential damage to the unit, turn off the unit and refer servicing to qualified service personnel.
8. This unit should be subjected to periodic routine maintenance (for example, once every 3 months) to make sure that the
unit is operating properly.
ADDITIONAL SAFETY CONSIDERATIONS
Install the swim spa to provide drainage for compartments of electrical components.
For floor recessed swim spas: Install to permit access for servicing from above or below the floor. Swim spa equipment must
be installed below water level.
When planning your swim spa installation site, prepare for the unlikely event of rapid swim spa drainage.
Do not place swim spa in direct sunlight while unit is empty or when sealed in shipping materials. Excessive heat build may
cause damage to swim spa and void warranty.
When installing swim spa, allow ample space for future servicing, noting location of all support equipment per the model
specifications.
SAVE THESE INSTRUCTIONS
Safety Instructions
6
