Parts Description and Function
8
Hydrotherapy Jets:
Various sized fittings mix water with air to produce localized therapy, in a straight stream, circular
motion, or in random patterns for massage. Positioned in massage seats from neck to feet,
RX6 massage columns.
Elite Pro™ Jets:
This is a large powerful jet (3 on Summit™ Series, 2 on Synergy™ Series, 1 on Vitality™ Series) that
is designed to move water at a high flow rate. The jet features a long horizontal nozzle for a wider,
more powerful and balanced fitness lane.
Ultra Massage Selector: (Diverter Valve)
Located on swim spa lip this fitting is much larger than
the air control described below. Turn to adjust pump power to selected jets which enhances water
action through those jets by decreasing water action through others. Be sure that no sand or
particles are brought into the swim spa as they will cause the diverter to seize up. It is best to turn
the diverter valve only when the pump is turned off.
Air Controls:
Fittings mounted on the lip of swim spa controlling amount of outside air mixed with
incoming water of the hydrotherapy jet. Your swim spa has multiple air control on the swim spa lip
that control air/ water mix for a segment of the jets. You choose the strength that best suits you.
When not in use, the air controls should be kept in the off position.
Suction:
Circular fitting mounted on the vertical wall of the footwell and serves as an additional
pump water inlet. These fittings are in all Series Fitness and Swim Spas. In the event any damage to
the suction cover occurs, replace immediately with a like VGB approved suction. This replacement
must be done every 7 years regardless of damage or not.
Pristine™ Filter:
All swim and fitness spas are equipped with skim suction-side filters. They assure
optimum water filtering and ease of cleaning at spa side. Review the maintenance section of this
manual for filter cartridge cleaning and replacement.
Ozone Jets:
All swim fitness spas are equipped with ozone jets for sanitation. The filter cycle
should circulate 8-10 hours daily for proper ozonation. Use the programmable electronic control
center to program this operation.
