Additional Settings
Restricting
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the Panel prevents the controller from being used, but all automatic functions are still active.
Locking the Settings allows Jets and other features to be used, but the Set Temperature and other programmed settings cannot be
adjusted.
Settings Lock allows access to a reduced selection of menu items. These include Filter Cycles, Invert, Information and Fault Log.
They can be seen, but not changed or edited. To lock either Settings or Panel first select Settings (if it says “Unlocked”) or Panel (if it
says “Unlocked”), than press the word “Lock“ for at least 5 seconds. To unlock either Settings or Panel first select Settings (if it says
“Locked”) or Panel (if it says “Locked”), than press the word “Lock“ for at least 5 seconds. Press for 5 seconds to unlock.
Hold—M037*
Hold Mode is used to disable the pumps during service functions like cleaning or
replacing the filter. Hold Mode will last for 1 hour unless the mode is exited manually.
If spa service will require more than an hour, it may be best to simply shut down power
to the spa. The Hold Icon on the Settings Screen places the spa in Hold Mode and
displays the System Hold screen. Touch Back to exit Hold Mode.
Set Temperature
Press Up or Down once to display the Set Temperature (indicated by a flashing ºF or ºC, plus a change in color of the temperature).
Press Up or Down again to modify the Set Temperature. The Set Temperature changes immediately.
If you need to switch between High Temperature Range and Low Temperature Range you need to go to the Settings Screen.
Press and Hold
If Up or Down is pressed and held, the temperature will continue to change until you stop pressing, or until the Temperature Range
limits are reached.
Press here for 5 seconds to lock or unlock
Panel locked and settings unlocked
Set Temperature Up
Set Temperature Down
Operation Systems
Summit™ Series | SX-SmartTouch™ Control
57