35
检
测
与
结
4.
Test and Test Result
4.1
To-Be-Tested Interface
After power-on self-test and calibration, the detector will
enter the To-be-tested interface, as shown in figure 4.1.
Fig 4.1 To-be-tested Interface
1. Date & Time
2.Condition prompt
3. Plan No.
4. Status bar
5. Test result
6. Upper & lower limits
7. Program No.
8. User No.
4.2
Program Selection and Setting
There are three program selection methods, including calling of
plan program; calling of template program and user-defined
program.
