46
6.3
Test Chamber Clean or Replacement
The test chamber of detector can be removed for cleaning or
replacement.
1.
Users could open the top cover of detector, insert one finger into
the test chamber, and use the friction force between the finger
and test chamber to pull out the test chamber.
2.
As the acquisition channel for optical signal, the bottom
structure of the test chamber is designed as a special
transparent cap. In order to ensure the optical performance, thus
the performance of detector, the test chamber cap shall be well
protected during disassembly. If any part of it is damaged, please
contact our service support or local distributor for test chamber
replacement.
3.
Users could clean the test chamber interior with warm water or
mild detergent. Let the test chamber natural air drying, after this
please insert it back into the detector till it reaches the bottom
and is locked. Please pay attention to ensure the right insertion
direction.
Warning
: Please power off the detector and remove the battery
before cleaning or replacing the test chamber.
Prohibit
: It is prohibited to clean the test chamber with strong
detergent.
