43
5.
Connect Detector to PC or Other
Terminals
5.
1
Connect Detector to PC
1.
Open the PC software on the computer and use the provided USB
cable to connect this computer with the detector while it is
power on;
2.
The
<
USB >
icon on the status bar of detector will be
lighted in blue and a prompt
< Connected >
will pop up on the
screen of detector, reminding users that the device is
successfully connected to the control computer;
3.
Click the
Connect
icon in the toolbar of the PC software.
The screen of detector will display a prompt
<
Communicating
…
>
, reminding users that the device is
communicating with the control computer to realize data
exchange and other operations.
5.
2
Disconnect Detector from the connected PC
After the detector is successfully connected to the control computer.
1.
Users could press
<
OK >
key on the detector to
disconnect the device from the conncted computer;
