Jumper JP1: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the setup
utility are incorrect and prevent your mainboard from operating. To
clear the CMOS memory, disconnect all the power cables from the
mainboard and then move the jumper cap into the CLEAR setting
for a few seconds.
Function Jumper
Setting
Normal Operation
Short Pins 1-2
Clear CMOS Memory
Short Pins 2-3
Jumper JP3: Keyboard Power On Selector
You can use hot keys on your keyboard as a power on/off switch
for the system. Use this jumper to turn this feature on or off.
Note:
Make sure that the system can provide 1A on +5VSB (+5V
Standby) signal before using the Keyboard Power On function.
Function Jumper
Setting
Enable Keyboard Power On
Short Pins 1-2
Disable Keyboard Power On
Short Pins 2-3
1
1
JP3
JP7
1
JP1
JP4
1
1
JP6
1
JP5
JP8
JP12
JP13
1
JP9