If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector IDE2 on the mainboard. If you have two devices
on the cable, one must be Master and one must be Slave.
Internal Sound Connections
If you have installed a CD-ROM drive or a DVD drive, you can
connect the sound output of the drive to the built-in sound system.
On the mainboard, locate the two 4-pin connectors for CDIN1 and
CDIN2. There are two kinds of connector because different brands
of CD-ROM drive have different kinds of cable connectors on their
audio output cable. Connect the cable to the appropriate connector.
Infrared Port
You can install the mainboard with an optional infrared port. You
can purchase these options from third-party vendors.
1. On the mainboard locate the infrared port header SIR1.
2. Connect the cable from the infrared port to the infrared header
SIR1 and then secure the infrared port to an appropriate place
in the system chassis.
Expansion Slots
This mainboard has three 32-bit PCI expansion slots and one AMR
slot. The PCI1 slot is shared with the onboard VGA and the
onboard Modem, and the PCI3 slot is shared with the onboard
1
CDIN2 CDIN1
SIR1-Infrared
Header
1
