PC Chips M770LMRT Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 49

background image

Advanced Setup Page

Use this page to set more advanced information about your system.
Take some care with this page. Making changes can affect the
operation of your computer.

AMIBIOS SETUP – ADVANCED SETUP

©1998 American Megatrends, Inc. All Rights Reserved

Trend ChipAwayVirus Enabled
1

st

Boot Device IDE-0

2

nd

Boot Device Floppy

Try Other Boot Devices          Yes
S.M.A.R.T. for Hard Disks      Disabled
BootUp Num-Lock                  On
Floppy Drive Swap                 Disabled
Floppy Drive Seek                  Disabled
Primary Display                      VGA/EGA
Password Check                    Setup
Boot to OS/2 Over 64MB       No
Internal Cache                        Enabled
System BIOS Cacheable        Disabled
Video BIOS Shadow               Enabled
DRAM Page Closing Policy   Open
CAS Latency                           3 SCLKs                  ESC :  Quit

: Select Item

Graphic Win Size                    64M                         F1     :  Help             PU/PD/+/-  :  Modify
Delayed Transaction               Disabled                  F5     :  Old Values (Shift)F2    :  Color
                                                                                F6     :  Load Optimal values
                                                                                F7     :  Load Best performance values

Trend ChipAway
Virus

This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
built-in virus protection.

1

st

Boot Device

2

nd

Boot Device

Use these two items to determine the order and
priority that your computer follows to load an
operating system at start-up time.

Try Other Boot
Devices

If you enable this item, the system will also
search for other boot devices if it fails to find an
operating system from the first two locations.

S.M.A.R.T. for
Hard Disks

Enable this item if your hard disk(s) supports
SMART (Self-Monitoring, Analysis and Reporting
Technology).

BootUp Num-

Lock

This items determines if the Num Lock key is
active or inactive at system start-up time.

«
...
31
32
33
34
35
...
»

Содержание M770LMRT


















































Отзывы:

Нет отзывов

Похожие инструкции для M770LMRT

Бренд: NXP Semiconductors Страницы: 14

RTKA788152DE0000BU

Бренд: Renesas Страницы: 11

Бренд: ASROCK Страницы: 2

Бренд: Zetex Страницы: 8

Бренд: IEI Technology Страницы: 131

Бренд: Obdstar Страницы: 46

VECTOR 1 MOTHERBOARD

Бренд: Vector Graphic Страницы: 14

Бренд: Infineon Страницы: 11

Бренд: Gigabyte Страницы: 64

Бренд: Advantech Страницы: 66

Бренд: JETWAY Страницы: 55

Бренд: Seco Страницы: 49

Бренд: STMicroelectronics Страницы: 17

Бренд: Advantech Страницы: 84

Бренд: Taiwan Commate Computer Inc. Страницы: 31

Бренд: PC Chips Страницы: 49

Бренд: Biostar Страницы: 84

Бренд: ASROCK Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды