Installing a Socket-370 Processor
The processor installs into the ZIF (Zero Insertion Force) Socket-
370 on the mainboard.
1. Locate the Socket-370, and CPUFAN1. Pull the locking lever
out from the socket and swing it to the upright position.
2. On the processor, identify the pin-1 corner by noting that it has
a slight bevel.
3. On the Socket-370, identify the pin-1 corner. The pin-1 corner
is on the same side as the locking lever, closest to the top of the
lever when it is in the locked position.
4. Match the pin-1 corners and insert the processor into the
socket. No force is required and the processor should drop into
place freely.
5. Swing the locking lever down and hook it under the catch on
the side of the socket. This locks the processor in the socket.
6. If the processor is installed with a cooling fan assembly,
connect the cable from the fan to the CPU fan power connector
CPUFAN1.
Install Memory
The mainboard has two DIMM slots which can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard.
Pin-1 Corner
Socket-370
CPUFAN1
