47
99B138120x-mub-en | 2014/11 | V05
EN
13.1 Cable specifications
Mains cable
Mains cable type
External diameter of mantle
Conductor cross-section
Single strand (solid)
Fine strand (with core end sleeves)
H05 VV-... (NYM…)
6.5 mm to 10 mm
≤ 2.5 mm
2
≤ 1.5 mm
2
Diameter of the internal strain relief
6.5 mm to 10 mm
Signal cable
Sensor cable length
≤ 100 m, including extension
Sensor extension cable Design
Cross-section of each conductor
twisted-pair conductors for lengths > 10 m
0.75 mm
2
for lengths < 50 m
1.5 mm
2
for lengths > 50 m
Exclusion of liability
The manufacturer can neither monitor the compliance with this manual nor the conditions
and methods during the installation, operation, usage and maintenance of the controller.
Improper installation of the system may result in damage to property and, as a result, to
bodily injury.
Therefore, the manufacturer assumes no responsibility and liability for loss, damage or
costs which result from or are in any way related to incorrect installation, improper
operation, incorrect execution of installation work and incorrect usage and maintenance.
Similarly, we assume no responsibility for patent right or other right infringements of third
parties caused by usage of this controller.
The manufacturer reserves the right to make changes to the product, technical data or
installation and operating instructions without prior notice.
Legal guarantee
In accordance with German statutory regulations, there is a 2-year legal guarantee on
this product for the customer. The seller will remove all manufacturing and material faults
that occur in the product during the guarantee period and affect the correct functioning of
the product. Natural wear and tear does not constitute a malfunction. No legal guarantee
can be offered if the fault can be attributed to third parties, unprofessional installation or
commissioning, incorrect or negligent handling, improper transport, excessive loading,
use of improper equipment, faulty construction work, unsuitable construction location or
improper operation or use. Legal guarantee claims shall only be accepted if notification of
the fault is provided immediately after it is discovered. Guarantee claims are to be directed
to the seller.
The seller must be informed before guarantee claims are processed. For processing
a guarantee claim an exact fault description and the invoice / delivery note must be
provided.
The seller can choose to fulfil the legal guarantee either by repair or replacement. If the
product can neither be repaired nor replaced, or if this does not occur within a suitable
period in spite of the specification of an extension period in writing by the customer, the
reduction in value caused by the fault shall be replaced, or, if this is not sufficient taking
the interests of the end customer into consideration, the contract is cancelled.
Any further claims against the seller based on this guarantee obligation, in particular
claims for damages due to lost profit, loss-of-use or indirect damages are excluded, unless
liability is obligatory by law.
