27
99B138120x-mub-en | 2014/11 | V05
EN
Activating the function
A function must be activated (activation =
on
) and all the associated
characteristics must be correctly set before it can be used. If a function
is activated and then exited before the characteristics are set then
oFF
flashes briefly (fig. left). After this, the function is displayed with a switching
state of
oFF
(function is deactivated).
You activate a function as follows:
√
Function number flashes.
1. Press
SET
. The function is selected and flashes.
2. Press
SET
.
oFF
is displayed.
3. Press
SET
.
oFF
flashes.
4. Press
.
on
flashes.
5. Press
SET
. The function is activated.
6. Set the characteristics as described below.
Copy time window
A set time window in the time control of some functions can be copied and
transmitted to another day.
You copy a time window as follows:
√
The time window was set in the function.
1. Open the set menu of the time window.
2. Press
until
COPY
displays.
3. Press
SET
.
to: d.1
is displayed.
4. Press
to choose the day.
5. Press
SET
. The time window was copied.
Setting the characteristics
The functions have different numbers of characteristics.
The characteristic values are always set via the same sequence of
operating steps.
You set the values of characteristics as follows:
√
The function has been activated as described previously.
1. Press
to select a characteristic.
2. Press
SET
. The value of the characteristic is displayed, the associated
component flashes in the system graphics.
3. Press
, to change the value.
4. Press
SET
to adopt the change.
5. Repeat steps 1 to 4 for the other characteristics.
6. Press
ESC
when all characteristics of the function have been set.
The function number flashes.
