manualshive.com logo in svg

Pavone Systems MC 315 Series, Техническое руководство

Поделиться
Скачать
Pavone Systems MC 315 Series Скачать руководство пользователя страница 30

Page 28

SERIAL COMMUNICATION PARAMETERS

This menu allows to configure the serial ports and the communication parameters. The unit has three 

independent serial ports:
COM1 and COM2 always with the RS485 interface; COM3, which uses fiber optics to connect various 

devices in a safe zone.

C1Prot. 

COM1 PROTOCOL

Defines the usage mode of the COM1 serial port:

Selectable values:

None:

 Serial communication disabled

Contin:

 Continuous transmission of the weight string. Can be used, among other things, to drive a 

weight repeater. See the relevant section for details.

on deM:

 A weight string is transmitted when the operator presses the relevant front key or via Input. 

The command is only executed if weight is stable. Weight should vary by at least 20 divisions 

between two subsequent transmissions.

Autom:

 A weight string is automatically transmitted when weight stabilizes on a value above 

minimum weighing (20 divisions).

Slave:

 ASCII Protocol. See the relevant section for details.

Default: Slave

C1bAud. 

COM1 BAUD RATE

Defines the baud rate of the COM1 serial port.
The value should be set to the same value as the PC/PLC or the remote display.

Selectable values:
1200; 2400; 4800; 9600; 19200; 38400; 57600; 115200
Default: 9600

C1FrAN 

COM1 PROTOCOL

Frame type. In case of SLAVE protocol, the 7-bit (E-7-1 and O-7-1) data format cannot be selected:

Selectable values:
n-8-1; n-8-2; E-7-2; E-8-1; o-7-2; o-8-1
Default: n-8-1

Содержание MC 315 Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды