Patton electronics 1092RC, Руководство пользователя

Страница: 21 / 40

Valid Model 1092RC Handshake status conditions are listed
below:
1. Handshaking - This status occurs when the 1092RC is in
the process of establishing a link with another 1092RC.
2. Data Mode - This status occurs when the 1092RC
successfully establishes a link with another 1092RC allowing
the data to flow.
3.2.7 MAIN MENU Option 7: Test Modes
Select Option 7 from the MAIN MENU to select the test mode status
of the Model 1092RC. (below). The Model 1092RC Test Mode settings
help to verify the integrity of the data link and isolate communication
difficulties.
NOTE: The 1092RC control port displays an error counter in
all test modes except options 4 and 7 listed above.
To run or terminate a particular test, key in the option to get to that
screen menu. If a particular test cannot be invoked, the unit displays
the message:
“Attempt unsuccessful!”.
17
REMOTE MAIN MENU Option 2: Remote Unit Configuration
REMOTE MAIN MENU Option 2 allows you to edit the software
configuration of the REMOTE Model 1092RC. Please note that after
editing the software configuration, you must select REMOTE MAIN
MENU Option 4, the select “Use Software Switches” and then select
MAIN MENU Option 5 to implement the most recent changes.
REMOTE MAIN MENU Option 3: Display Remote Modem Status
Select REMOTE MAIN MENU Option 3 to display the status of the
REMOTE unit.
REMOTE MAIN MENU Option 4: Display Hardware/Software Control
Select REMOTE MAIN MENU Option 4 to select whether the
remote Model 1092RC will use the hardware switch settings or the
software switch settings for its active configuration.
REMOTE MAIN MENU Option 5: Restart Remote Unit
Select REMOTE MAIN MENU Option 5 to restart the remote
unit.
20
REMOTE UNIT CONFIGURATION MENU
1. DTE Rate
2. Clock Mode
3. DSR during Local Line Loop
4. Response Remote Digital Loop
5. DTE Controlled Local Line Loop
6. DTE Controlled Remote Digital Loop
7. 2-Wire/4-Wire Selection (ONLY FOR 1092A)
NOTE: All REMOTE CONFIGURATION sub-menus are
similar to the LOCAL CONFIGURATION sub-menu
screens. See Section 3.2.1 for details.