Paton StandardMIG-160, Техническое описание и руководство по эксплуатации

Страница: 8 / 37

PATON StandardMIG MMA/TIG/MIG/MAG
-8 -
1 – Buttons for incrementation and decrementation of the selected parameter
(by default: in MMA mode—welding current, in TIG mode—welding current,
in MIG/MAG mode—welding voltage).
2 – Digital seven‐segment display of the source.
3 – Unit of measurement of a current displayed parameter:
a) “V” – volt;
b) “A” – ampere;
c) “%” – percent;
d) “s” – second/time.
4 – Indicator of a current/selected welding mode.
5 – Button for selecting function in the current welding mode.
6 – Button for selecting required welding mode:
a) manual metal arc welding with a stick electrode (MMA);
b) tungsten arc inert gas welding (TIG);
c) semiautomatic metal inert/active gas welding (MIG/MAG).
7 – Machine operation indicator:
a) permanent green light—during stabilization of source operating mode
and MMA welding;
b) permanent yellow light—in the operator wait mode during tungsten arc
inert gas welding and semiautomatic welding, as well as source
overheating in any mode;
c) blinks green and yellow—while welding in any mode;
d) permanent red light—in case of malfunction;
e) no light—in case of mains voltage rise or drop beyond the normal value.
8 – The button of wire leading-in (while gas is not supplied).
9 – Digital seven-segment display of the wire-feeding machine.
10 – Button for selecting the functions of the wire-feeding machine.
11 – Shielding gas test button (wire feeding is disabled).
12 – Buttons for adjusting parameters for decreasing and increasing (by default:
wire feeding speed).
13 – Socket KZ‐2 of EURO type for semiautomatic torch connection.
А – Power current socket “+” of bayonet type:
a) in case of MMA welding—for connection of electrode cable (very
occasionally “mass” cable can be connected, if special electrodes are
used);
b) in case of TIG welding—only “mass” cable is connected;
c) in case of MIG/MAG
solid wire welding—a plug is connected internally to
the feeder (by default);