Paton ProTIG-200, Руководство пользователя

Страница: 45 / 51

PATON ProTIG DC TIG/MMA
- 44 -
Welding can be started.
5.1 Cyclogram of
ММА welding mode using coated electrode
Symbols:
Іс – hot start current;
Тс – hot start time;
Ізв – main welding current;
В – balance of pulses polarity;
F – pulses frequency;
Іп – lower welding pulses current.
Typical cyclogram of ММА +pulse operation
Example of using pulsed mode:
Switch on the device, switch the mode of
ММА DC welding, set up the basic
parameters as follows:
1. "Main current" – main welding current, 100 А.
2. "Pulse balance" – balance of pulses shape, 50%.
3. "Pulse frequency" – 50 Hz.
4. "Low current" – (pulsed mode ), 50 А .
5. "Antistick" – on.
6. "Hot start" – 50%.
7. "Arc force" - OFF.
8. "Pulse mode"
– ON or OFF
PAY ATTENTION!! In order to activate the pulsed mode, it is necessary to change the
value of the "Pulse mode" parameter to "ON", after which the indicator 8 should change
the value to "P" (pulsed mode is on). The indicator "W" should be illuminated with red. After
that welding can be started. At the beginning of the process, the current will increase to 150