Paton ProTIG-200, Руководство пользователя

Страница: 35 / 51

PATON ProTIG DC TIG/MMA
- 34 -
3. « Start current » ;
4. « Rise time » – time of current rise;
5. « Main current » – main welding current;
6. « Fall time » ;
7. « Finish current » (crater rewelding current);
8. « Postflow » – time after blowing;
9. « Balance АС» ;
10. « Frequency АС» ;
11. « Pulse mode » – switching on/off pulsed mode;
12. « Pulse balance » – balance of pulses shape;
13. « Pulse frequency » – frequency of pulses;
14. « Low current » – lower current in the pulsed mode.
15 . « Remote control » – remote regulation of current on the torch;
16 . « TIG Lift » – switching on the contact arc ignition in TIG mode;
17 . « Double pulse » – switching on the function of double pulse;
18. « Pulse time » – welding time in SPOT mode;
19. « Main current » – main current in SPOT mode;
20. « Pause time » – pause time in SPOT welding mode;
21 . « Current type » – change of current type: AC or DC;
22 . « Antistick » – function for counteraction of electrode sticking;
23. « Hot start » – function of improving the electrode ignition;
24. « Arc force » – function of welding arc burning stabilization.
3.2 Reset the machine to factory settings
To reset all saved programs in all modes to factory settings it is required to:
- switch off the device;
- press and hold the
button « Program" ( 2 );
- switch on the machine.
When resetting is completed, on the screen "Reset done" will be written.
3.3 Choosing the interface language
To change the interface language of the device it is required to:
- switch off the device;
- press and hold the
button « Mode" ( 1 );
- switch on the device;
- without releasing the
button « Mode" ( 1 ), select the required language with the
buttons "Right" ( 6 ) and "Left" ( 7 );
- release the button « Mode" ( 1 ).
4. MANUAL ARC WELDING WITH A NON-CONSUMABLE ELECTRODE IN THE
INERT GASES ENVIRONMENT (TIG AC/DC)
In order to start welding in TIG AC/DC mode it is required to:
- connect torch to source socket of black colour
« - » ( В );