Paton ProTIG-200, Руководство пользователя

Страница: 50 / 51

- 49 -
PATON ProTIG DC TIG/MMA
At least once a week it is necessary to check the machine for external damages and
functioning of safety devices.
13. WARRANTY OBLIGATIONS
PATON INTERNATIONAL guarantees the proper operation of the welding current
source, provided that the user complies with the conditions of operation, storage and
transportation.
WARNING! Free warranty service is absent during mechanical damages to the
welding machine!
Machine model Warranty term
ProTIG-200 AC/DC
2 years
ProTIG-315-400V AC/DC 1 year
The main warranty period is counting from the day of selling the inverter
equipment to the final buyer.
During the main warranty period, the seller undertakes obligation before the
owner of the inverter equipment PATON to do free of charge:
- make diagnostics and identify the cause of the failure;
- provide the necessary units and elements for repair;
- carry out works to replace the elements and units that have failed;
- test the repaired equipment.
The main warranty obligations do not apply to the equipment:
- with mechanical damages that affected the serviceability of the machine (deformation
of the casing and parts as a result of falling from a height or falling of heavy objects on the
equipment, loss of buttons and sockets);
- with traces of corrosion that caused a faulty condition;
- that has failed due to the impact of considerable moisture on its force and electronic
elements;
- that has failed through the accumulation of dust (carbon dust, metal chips, etc.) inside
the current conductor;
- in case of attempt of self-repair of its units and/or replacement of electronic elements;
In order to avoid failure of the machine, depending on the operating conditions,
once every six months, it is recommended to clean the inner elements and units of this
equipment with compressed air, for which it is necessary to remove the protective cover.
Cleaning should be done carefully, holding the compressor hose at a sufficient distance to
avoid damage to the brazed joints of electronic components and mechanical parts.
Also, the main warranty obligations do not apply to external elements of the
equipment that are undergoing physical contact and related/consumables, claims on which
are accepted not later than two weeks after sale:
- button for switching on and off;
- handles for regulation of welding parameters;