Paton PRO-315-400V, Техническое описание и руководство по эксплуатации

Страница: 24 / 33

PATON PRO-315 MMA/TIG/MIG/MAG
-24 -
2 . With a quick press and release of the button 3 , you can switch to the next
function in a circle.
Warning! If the button 3 is held for a long time at the moment of viewing the
function name, after about 10 seconds, the countdown will begin on the digital
display 333 ... 222 ... 111 warning of the reset of all current mode settings.
6.2 SWITCH TO THE DESIRED WELDING MODE
Pressing the button 7 leads to switching to the next welding mode in a circle,
the switching process is very fast.
6.3 RESET OF ALL CURRENT WELDING MODE FUNCTIONS
There may be situations when the settings in the machine are somewhat
confusing to the user. In order to reset them to the standard factory ones, it is
enough to hold button
3 continuously for more than 10 seconds. As mentioned in
the previous paragraph, the countdown will start 333 ... 222 ... 111 and upon
reaching "000" all settings of the current welding mode will be updated to the
default settings. To reset all the machine settings, you need to do this operation
for each mode separately, this is done for convenience, in order not to reset the
second two modes that are individually configured by the user before. Do not
forget to remove the lock from button
3 before resetting (see cl. 6.1).
7. GENERAL LIST AND SEQUENCE OF FUNCTIONS
Welding mode MAW "MMA"
0) [-1-] - the main display parameter CURRENT = 90 A (default)
a) 15 ... 315A (change step 1 A) for PRO-315
1) [H.St] Hot Start power = 40% (default)
a) 0 [OFF] ... 100% (1% increments)
2) [t.HS] Hot Start time = 0.3 sec (default)
a) 0.1 ... 1.0 sec (0.1 sec increments)
3) [Ar.F] "Arc-Force" power = 40% (default)
a) 0 [OFF] ... 100% (1% increments)
4) [u.AF] "Arc-Force" trigger level = 12 V (default)
a) 9 ... 18V (1 V increments)
5) [CVC] current-voltage characteristic slope = 1.4 V/A (default)
a) 0.2 ... 1.8 V/A (0.4 V/A increments)
6) [Sh.A] short arc welding = OFF (default)
a) On
b) OFF
7) [BSn] voltage reduction unit = OFF (default)
a) On