Paton PRO-315-400V, Техническое описание и руководство по эксплуатации

Страница: 27 / 33

-27 -
PATON PRO-315 MMA/TIG/MIG/MAG
Reserved source should be stored in dry closed rooms at air temperature not
lower than +5
0
С. Premises should be cleaned from acid vapors and other active
substances.
11. TRANSPORTATION
Packaged source can be transported by all modes of transport, ensuring its
safety in compliance with the rules of transportation established for this type of
transport.
12. TECHNICAL DETAILS
Warning! If the source is designed for a special supply voltage, its technical
data is given on the identification plate on the rear panel. In this case, the mains
plug and the power cable should be selected according to the voltage used.
Rated voltage of the mains is 50/60 Hz 3х 400 V
Limits of change of the mains interfacial tension 320 – 440 М
Efficiency (at rated current) 91%
Limits of arc current regulation 15 – 315 А
Arc current at:
5 min / 70% LD
5 min / 100% LD
315 А
260 А
Maximum power consumption 13.5 kVA
Normal operating voltage:
- manual metal arc electrode welding (MAW)
- Tungsten arc inert gas welding, with non-consumable
electrode (ARG)
- semi-automatic wire welding (SA)
21 – 28 V
10 – 18 V
12 – 30 V
13. SCOPE OF SUPPLY
1. The power source of the welding arc with a network cable – 1 pc;
2. Strap for carrying on shoulder – 1 pc;
3. PATON™ corporate plastic case – 1 pc;
4. Welding cable with Binzel™ electrode holder, 3m – 1 pc;
5. Welding cable with a Binzel™ ground terminal, 3m – 1 pc;
6. Operating manual – 1 pc.