pathway choreo, Руководство пользователя

Страница: 60 / 153

52
Copy Attributes
When programming lights you often work with one light to get the color and
maybe even position or gobos you want, then want to copy that work to a group
of other lights.
1. Select the ligh t that easily visible to you from your programming
position and has the features you want to manipulate.
2. Use the CONTROL task to adjust the attributes.
3. Return to SELECT and press EDIT .
4. The status bar will change:
5. Select other lights you want to look like the first light by either touching
them directly or using other SELECT tools like Groups or Dynamic Tools.
6. Press EDIT to finish the copy command.
NOTE
Natural Language Control makes this Copy command very powerful. Choreo
can copy attributes that function very differently in one light to another. For
example, if you mix a color in RGB, you can copy that to a light that uses a
color wheel. Choreo will do its best to find the closest matched color in the
color wheel. See
Natural Language Control for further examples.
Control
CONTROL allows you to manipulate a light’s attributes. Attributes are
organized into families of Intensity , Color , Position and Shape
. Only those attributes supported by the selected light are shown. If lights
with differing attributes are selected, the tools available are determined by the
first light selected. At least one light must be selected to activate CONTROL.
When you select a Light and go to CONTROL | ATTRIBUTES, there are four (or
less) ‘bubbles’ to show you what attributes are available. In the center of the
screen is a mimic of what the light is doing similar to the ones in SELECT: