pathway choreo, Руководство пользователя

Страница: 11 / 153

How To...
3
How to Patch a Light
To patch a light you must know the light’s manufacturer, its model type, its
operating mode, and its DMX start address.
1. Select the position in the Fixture Grid where you wish to patch the
light. The cell’s outline will turn red.
2. At the bottom of the screen, touch Settings.
3. Touch Light Type on the Advanced Tools bar.
4. Scroll through the list on the left to locate the light's manufacturer, then
the list on the right to locate the light's model type and operating mode.
5. Touch Apply
6. The screen will shift to the DMX grid and the DMX Addr icon on the
Advanced Tools bar will be highlighted. Each cell on the DMX grid
represents one DMX slot.
The small number at the top of each cell is the DMX slot number. The large
number in the middle of each cell is the number of the light patched to that
slot, and at the bottom of each cell is a brief description of the attribute that
the DMX slot controls. Use the arrows to locate the cell corresponding to
your light’s DMX start address.
7. Touch the cell to ‘patch’ your light to that starting channel. Touch Apply
.
NOTE
•
You will find many generic color-changing LED lights under the
Manufacturer "Generic". Generic is at the top of the alphabetically
sorted list of manufactures on the left hand side for convenience.
•
To patch several lights of the same time at the same time, select
multiple lights on the SLECT task before selecting the light’s
type. Select the location of the DMX start address of the first fixture,
and the remaining lights will automatically be patched sequentially.