pathway choreo, Руководство пользователя

Страница: 71 / 153

Tasks
63
You can get to more properties using the up and down arrows on the
right hand side
Cue Timings - Basic Properties
Fade : Sets a basic crossfade time. If no other timings are set, this timing
will be used to govern a light’s change in Intensity, Color, Position and
Shape attributes.
Delay : Sets a delay time between pressing GO and the start of the fade.
Down Fade
: Sets a different fade time for all lights moving to a lower
intensity. If no value is set, the down time equals the Fade time.
Down Delay : Sets a delay time between pressing GO and the start of the
Down Fade. Allows you to create a ‘split-crossfade’ for situations where
some lights must come up before other lights go down.
Follow Options
Wait For Go : Default behavior. When a cue’s fade time is complete, the
controller requires an outside trigger (typically the operator to press GO) to
advance to the next cue.
Follow On After Fade
: When a cue’s fade time is complete, the playlist
immediately advances to and begins to run the next cue.
Follow On In Time : The console begins the next cue after the Follow Time
has elapsed. The Follow Time starts counting when the cue begins.
Follow On Immediately : The controller begins the current cue and next cue
at the same time. Equivalent to a Follow In Time of 0s (zero seconds).
Follow Time : Sets the time used by the Follow On In Time option above.
Link : Links the completed cue to another cue that does not immediately
come after it in the Playlist. The default is to link to the next cue in the
Playlist. If no Follow option has been set, the operator will still have to press
GO.
“Link” and “Follow” allow for the creation of loops that will play indefinitely.
Press the playlist’s Go button to exit the loop and advance to the next cue
in the playlist after the link. See
Playlist as a Chase for additional dynamic
playback options without using Follow and Link.
Position/Color Timing Options
Position Fade : Sets a time for a moving light’s repositioning. If no value is
set, any repositioning will use the Fade time.
Position Delay : Sets a delay time between pressing GO and starting the
Position Fade.