pathway choreo Скачать руководство пользователя страница 17

Страница: 17 / 153

How To...

Touch the Record icon

to open the RECORD tasks.

Touch the Record Cue

icon.

If necessary, touch the Playlist you want to record to in the red Select

Playlist toolbar.

The last cue in the Playlist should have a green bar below it. If you want to

record it elsewhere, touch an existing cue and use the

icons to move the green bar.

If you want to overwrite a cue, just touch it to highlight it in red. The green
bar will disappear.

Touch Done

to record the cue with default timings, and you will be

returned to your previous CONTROL task. The attributes will be released
and under control of the new cue, but the lights will still be selected
allowing you to alter them further if desired.

NOTE

If you don't edit the Cue Properties, default timing will be used. See

Tasks

Record Cue

for more information of recording Cues.

How to Playback Memories

Touch the PLAY icon

Touch Memory

The screen will display eight of the Memories saved in the current Memory
Page.

Содержание choreo


























































































































































Результаты поиска

Содержание choreo

Отзывы:

Бренды по названию

Популярные бренды

pathway choreo, Руководство пользователя

Результаты поиска

Содержание choreo

Отзывы:

Бренды по названию

Популярные бренды